The same LCD is used across all the ZERO models so this ZERO LCD applies to 8, 9, 10, 10X, 11X models.
This tutorial only applies to the QS-S4 LCD throttle.
Here are the extent of the settings:
1. P01 - LCD brightness level (1, 2, 3)
2. P02 - Mileage display in km or miles
3. P03 - Voltage level of machine (24, 36, 48, 52, 60V)
4. P04 - 1-60 mins before machine goes to sleep with inactivity
5. P05 - N/A
6. P06 - Wheel diameter in inches
7. P07 - No. of magnets on motor (Default 30)
8. P08 - Power Level (0-100)
9. P09 - Zero start or kickstart
10. P10 - N/A
11. P11 - Electronic braking on or off
12. P12 - Soft or high acceleration (1 is softest start; 5 is highest torque)
13. P13 and P14 - N/A
14. P15 - Controller cutoff voltage
15. P16 - Zero-ing of ODO
16. P17 - cruise mode
17. P18 to P20 - N/A
Fault Codes:
2 - brake
4 - 6kmh cruise
6 - battery undervoltage
7 - motor faulty
8 - throttle faulty
9 - controller faulty
10 - faulty comms between controller and LCD
11 - faulty comms between controller and LCD
12 - BMS failure
13 - headlight failure
We have also made a custom thumb throttle option that will be easier to throttle for some users. This works the same way as the stock ZERO QS-S4 throttle except the throttle lever is pushed by the thumb instead of being triggered by the fore finger.